Internacionalni Anti Stres Centar
Dobrodošli na IASC internet prodavnicu. U prilici smo da Vam ponudimo širok spektar proizvoda iz domena zdravlja i lepote (proizvodi za porodično zdravlje, za profesionalnu upotrebu u ordinacijama, kozmetičkim salonima, fitnes i spa centrima), knjige, kao i obrazovanje na licenciranim stručnim i popularnim edukativnim kursevima i seminarima.
O Nama GOTOVINSKA SNIZENJA Načini Plaćanja Cenovnik
Video Galerija Kontakt Prodajna Mesta Informacije
Kućni Aparati Profesionalni Aparati Kursevi & Obuke Publikacije & Knjige
  Početna stranica » Katalog » Kućni Aparati » Elektro misicni stimulator »
Odjava
|
Korpa
|
Blagajna
Kategorije
Povoljni uslovi plaćanja više o ...
Novi proizvodi više o ...
BREMED kucna vaga za bebe i mame BD-7722
BREMED kucna vaga za bebe i mame BD-7722
5.400 din
Valute
Komentar više o ...
Napiši komentarNapiši ocenu ovog proizvoda!
HAROX elektro misicni stimulator HX-K11 33.000 din 28.000 din Verzija za stampu
 
HAROX elektro misicni stimulator HX-K11


Narucite telefonom (011) 78-38-111
(065) 39-73-798

Dear User,

Thank you for purchasing the electro muscle stimulation device – HAROX ELECTRO MUSCLE STIMULATOR. We believe it will fulfill all of your requirements and become a necessary and reliable aid in your work.

HAROX – HEALTH COMES FIRST

Welcome to HAROX TECHNOLOGIES, Inc. – WORLD OF HEALTH & BEAUTY

INTRODUCTION

Congratulations on the decision to save the most valuable asset in your life – your health! Modern living conditions are a cause of a growing number of health issues. For this reason, HAROX Technologies Inc. has started a mission of health and beauty, and made a top of the line device: ELECTRO MUSCLE STIMULATOR.

ELECTRO MUSCLE STIMULATOR is a microprocessor-controlled device for electro muscle stimulation. It is used for professional purposes in medical facilities (physical medicine and rehabilitation), fitness centres, and in other applications.

Top quality of ELECTRO MUSCLE STIMULATOR is certified by a warranty period of as much as 40 months.

ELECTRO MUSCLE STIMULATION

Electro muscle stimulators operate on the principle of low-frequency currents, with the option of adjusting the frequency, contraction, relaxation and overall therapy time.

In wider use are Stimulators with 4, 8 and 12 channels, or 8, 16 and 24 electrodes (each channel has 2 electrodes).

ELECTRO MUSCLE STIMULATOR proved successful in use with many pathological conditions and is widely utilised in medicine and cosmetology.

DEVICE HX-K7

DESCRIPTION OF THE DEVICE

The HX-K7 consists of

  • Electro muscle stimulation device (hereinafter: the device)
  • Electrodes and accessories (hereinafter: electrodes)

The back of the device contains:

  • Power supply switch ON/OFF
  • City grid power supply cable

The front side of the device features:

  • Soft-touch pushbutton for the start/stop of operation – START/STOP
  • Red LED indicating the activity of the device – POWER ON
  • Potentiometer for the adjustment of period of treatment – TIME
  • Potentiometer for the adjustment of frequency – FREQUENCY
  • Potentiometer for the adjustment of contraction – CONTRACTION
  • Potentiometer for the adjustment of relaxation – RELAXATION
  • Potentiometer for the adjustment of intensity – INTENSITY
  • Electrode sockets
USER’S MANUAL

Attach the grid power cable into the 220V socket, and the electrode cables into the appropriate sockets on the front side of the device (looking from the left-hand side, the first socket is for channels ch1 & ch2, ... with the sixth socket for channels ch11 & ch12).

Important note : Set the p otentiometers for INTENSITY, FREQUENCY, CONTRACTION, RELAXATION and TIME to minimal values, i.e. to the far-left position.

By pressing the ON/OFF switch on the back, turn on the device.

Slip the electrodes into the macerated sponge sleeves and place them on the treated areas of the body, fasten them with the belt, and then connect them to the cables. Keep in mind that electrodes and sleeves must not be in contact ones with the others. Each channel possesses 2 electrodes.

With potentiometers for FREQUENCY , CONTRACTION, RELAXATION and TIME set the desired values for frequency, contraction, rest and the duration of stimulation (See User’s manual).

Pressing the soft-touch pushbutton – START – commences the electro muscle stimulation, which is indicated by the red LED – POWER ON, which is lit continuously.

By potentiometers INTESITY set the intensities of the channels so that they cause a rhythmic movement of the muscles (the recommendation when setting the values for contraction and rest is that they be as low as possible). In an event that stronger stimulation is required, increase the intensity by rotating the potentiometer INTENSITY in millimetre increments.

After the set time of stimulation has elapsed, the aural signal is heard after which the device turns off automatically, i.e. the red LED POWER ONgoes off. Press the ON/OFF switch at the back of the device to turn it off. Repeat the previously described procedure in the next therapy session.

Stimulation may be terminated at any time by pressing the ON/OFF switch at the back of the device.

Note: In an event of lapse of stimulation, set the channel intensity to minimum value (far-left position), and check the electrodes (fasten them with the belt) and cables (their contact with the electrode).

DEVICE HX-K7p

DEVICE DESCRIPTION

The HX-K7p kit consists of:

  • Electro muscle stimulation device (hereinafter: the device)
  • Electrodes and accessories (hereinafter: electrodes)

The back of the device contains:

  • Power supply switch ON/OFF
  • City grid power supply cable

The front side of the device features:

  • Soft-touch pushbutton for the start/stop of operation – START/STOP
  • Red LED indicating the activity of the device – POWER ON
  • Potentiometer for the adjustment of period of treatment – TIME
  • Potentiometer for the adjustment of frequency – FREQUENCY
  • Potentiometer for the adjustment of contraction – CONTRACTION
  • Potentiometer for the adjustment of relaxation – RELAXATION
  • Potentiometer for the adjustment of intensity – INTENSITY
  • Electrode sockets
USER’S MANUAL

Attach the grid power cable into the 220V socket, and the electrode cables into the appropriate sockets on the front side of the device (looking from the left-hand side, the first socket is for channels ch1 & ch2, ... with the sixth socket for channels ch11 & ch12).

Important note : Set the p otentiometers for INTENSITY, FREQUENCY, CONTRACTION, RELAXATION and TIME to minimal values, i.e. to the far-left position.

By pressing the ON/OFF switch on the back, turn on the device.

Slip the electrodes into the macerated sponge sleeves and place them on the treated areas of the body, fasten them with the belt, and then connect them to the cables. Keep in mind that electrodes and sleeves must not be in contact ones with the others. Each channel possesses 2 electrodes.

Choose the desired mode:

  • Manual
  • Programmed

Manual Mode

Set the potentiometer PROGRAM into position 0. With potentiometers for FREQUENCY , CONTRACTION, RELAXATION and TIME set the desired values for frequency, contraction, rest and the duration of stimulation (See User’s Manual) .

Pressing the soft-touch pushbutton – START – commences the electro muscle stimulation, which is indicated by the red LED – POWER ON, which is lit continuously.

By potentiometers INTESITY set the intensities of the channels so that they cause a rhythmic movement of the muscles (the recommendation when setting the values for contraction and rest is that they be as low as possible). In an event that stronger stimulation is required, increase the intensity by rotating the potentiometer INTENSITY in millimetre increments.

After the set time of stimulation has elapsed, the aural signal is heard after which the device turns off automatically, i.e. the red LED POWER ONgoes off. Press the ON/OFF switch at the back of the device to turn it off. Repeat the previously described procedure in the next therapy session.

Stimulation may be terminated at any time by pressing the ON/OFF switch at the back of the device.

Note: In an event of lapse of stimulation, set the channel intensity to minimum value (far-left position), and check the electrodes (fasten them with the belt) and cables (their contact with the electrode).

Programmed Mode

By potentiometer PROGRAM choose the desired programmed mode of operation (positions 1 to 5). In the Programmed mode, the values for frequency, contraction, and relaxation of electrical signals are defined by the program (see Program modes). The potentiometer TIME sets the desired time of stimulation.

Pressing the soft-touch pushbutton – START – commences the electro muscle stimulation, which is indicated by the red LED – POWER ON, which is lit continuously.

By potentiometers INTESITY set the intensities of the channels so that they cause a rhythmic movement of the muscles (the recommendation when setting the values for contraction and rest is that they be as low as possible). In an event that stronger stimulation is required, increase the intensity by rotating the potentiometer INTENSITY in millimetre increments.

After the set time of stimulation has elapsed, the aural signal is heard after which the device turns off automatically, i.e. the red LED POWER ONgoes off. Press the ON/OFF switch at the back of the device to turn it off. Repeat the previously described procedure in the next therapy session.

Stimulation may be terminated at any time by pressing the ON/OFF switch at the back of the device.

Note: In an event of lapse of stimulation, set the channel intensity to minimum value (far-left position), and check the electrodes (fasten them with the belt) and cables (their contact with the electrode).

DEVICE HX-K9

DEVICE DESCRIPTION

The HX-K9 kit consists of:

  • Electro muscle stimulation device (hereinafter: the device)
  • Electrodes and accessories (hereinafter: electrodes)

The back of the device contains:

  • Power supply switch ON/OFF
  • City grid power supply cable

The front side of the device features:

  • Soft-touch pushbutton for the start/stop of operation – START/STOP
  • Red LED indicating the activity of the device – POWER ON
  • Potentiometer for the adjustment of period of treatment – TIME
  • Potentiometer for the adjustment of frequency – FREQUENCY
  • Potentiometer for the adjustment of contraction – CONTRACTION
  • Potentiometer for the adjustment of relaxation – RELAXATION
  • Potentiometer for the adjustment of intensity – INTENSITY
  • Electrode sockets
USER’S MANUAL

Attach the grid power cable into the 220V socket, and the electrode cables into the appropriate sockets on the front side of the device (looking from the left-hand side, the first socket is for channels ch1 & ch2, ... with the sixth socket for channels ch11 & ch12).

Important note : Set the p otentiometers for INTENSITY, FREQUENCY, CONTRACTION, RELAXATION and TIME to minimal values, i.e. to the far-left position.

By pressing the ON/OFF switch on the back, turn on the device.

Slip the electrodes into the macerated sponge sleeves and place them on the treated areas of the body, fasten them with the belt, and then connect them to the cables. Keep in mind that electrodes and sleeves must not be in contact ones with the others. Each channel possesses 2 electrodes.

With potentiometers for FREQUENCY , CONTRACTION, RELAXATION and TIME set the desired values for frequency, contraction, rest and the duration of stimulation (See User’s manual).

Pressing the soft-touch pushbutton – START – commences the electro muscle stimulation, which is indicated by the red LED – POWER ON, which is lit continuously.

By potentiometers INTESITY set the intensities of the channels so that they cause a rhythmic movement of the muscles (the recommendation when setting the values for contraction and rest is that they be as low as possible). In an event that stronger stimulation is required, increase the intensity by rotating the potentiometer INTENSITY in millimetre increments.

After the set time of stimulation has elapsed, the aural signal is heard after which the device turns off automatically, i.e. the red LED POWER ONgoes off. Press the ON/OFF switch at the back of the device to turn it off. Repeat the previously described procedure in the next therapy session.

Stimulation may be terminated at any time by pressing the ON/OFF switch at the back of the device.

Note: In an event of lapse of stimulation, set the channel intensity to minimum value (far-left position), and check the electrodes (fasten them with the belt) and cables (their contact with the electrode).

DEVICE HX-K11

DEVICE DESCRIPTION

The HX-K11 kit consists of:

  • Electro muscle stimulation device (hereinafter: the device)
  • Electrodes and accessories (hereinafter: electrodes)

The back of the device features:

  • Power supply switch ON/OFF
  • City grid power supply cable

The front side of the device features:

  • Red LED indicating the activity of the device – POWER ON
  • Potentiometer for the adjustment of frequency – FREQUENCY
  • Potentiometer for the adjustment of contraction – CONTRACTION
  • Potentiometer for the adjustment of relaxation – RELAXATION
  • Potentiometer for the adjustment of intensity – INTENSITY
  • Electrode sockets
USER’S MANUAL

Attach the grid power cable into the 220V socket, and the electrode cables into the appropriate sockets on the front side of the device (looking from the left-hand side, the first socket is for channels ch1 & ch2, ... with the sixth socket for channels ch11 & ch12).

Important note : Set the p otentiometers for INTENSITY, FREQUENCY, CONTRACTION, RELAXATION and TIME to minimal values, i.e. to the far-left position.

Slip the electrodes into the macerated sponge sleeves and place them on the treated areas of the body, fasten them with the belt, and then connect them to the cables. Keep in mind that electrodes and sleeves must not be in contact ones with the others. Each channel possesses 2 electrodes.

With potentiometers for FREQUENCY , CONTRACTION, RELAXATION and TIME set the desired values for frequency, contraction, rest and the duration of stimulation (See User’s manual).

Pressing the soft-touch pushbutton – START – commences the electro muscle stimulation, which is indicated by the red LED – POWER ON, which is lit continuously.

By potentiometers INTESITY set the intensities of the channels so that they cause a rhythmic movement of the muscles (the recommendation when setting the values for contraction and rest is that they be as low as possible). In an event that stronger stimulation is required, increase the intensity by rotating the potentiometer INTENSITY in millimetre increments.

After the set time of stimulation has elapsed, the aural signal is heard after which the device turns off automatically, i.e. the red LED POWER ONgoes off. Press the ON/OFF switch at the back of the device to turn it off. Repeat the previously described procedure in the next therapy session.

Stimulation may be terminated at any time by pressing the ON/OFF switch at the back of the device.

Note: In an event of lapse of stimulation, set the channel intensity to minimum value (far-left position), and check the electrodes (fasten them with the belt) and cables (their contact with the electrode).

FREQUENCY

Frequency of electrical signals is indicated in Hz, and is set by potentiometer – FREQUENCY. ELECTRO MUSCLE STIMULATOR devices are capable of adjusting the frequency in the range of 10 to 150 Hz.

CONTRACTION/ REST

Contraction/relaxation is a ratio between the duration of impulse and rest phases of electrical signals, and is set by potentiometers CONTRACTION, or RELAXATION, respectively. ELECTRO MUSCLE STIMULATOR devices are capable of adjusting contraction and rest in the range of 0.5 to 9.

INTENSITY

Intensity indicatesthe strength of the electrical signals, and is set by potentiometers INTENSITY. ELECTRO MUSCLE STIMULATOR devices are capable of adjusting intensity in the range of 0-10.

PROGRAMMED MODES

Unlike models HX-K7, HX-K9 and HX-K11, model HX-K7p, apart from manual mode of operation, has a programmed mode of operation (the values for frequency, contraction and relaxation are defined by the program). Application of program modes is as follows:

  • Program 1: lymphatic drainage
  • Program 2: lipolysis
  • Program 3: fibrous cellulite
  • Program 4: oedema cellulite
  • Program 5: surface cellulite
TIME OF STIMULATION

Devices HX-K7, HX-K7p and HX-K9 are capable of setting the duration of stimulation in the range between 10 and 60 minutes, while the model HX-K11 has a fixed time of stimulation (fail-safe), which is 30 min .

INDICATIONS

ELECTRO MUSCLE STIMULATOR devices have a wide range of application in medicine and cosmetology. Some of the basic indications are:

  • Low peripheral circulation
  • Post-traumatic conditions
  • Rheumatism
  • Ischialgia
  • Stress and fatigue conditions
  • Reduced mobility
  • General relaxation and muscle exercises
  • Cellulite
  • Skin tightening
  • Muscle tightening
  • Body forming
  • Lymphatic drainage.
COUNTERINDICATIONS
  • Malign tumours and pre-cancerous conditions, pacemaker, diagnosed heart disease, without actual risk assessment, undiagnosed pain syndromes, without definite cause of disease, rachitic changes, haemorrhages and proneness to haemorrhage, increased blood pressure.

ELECTRO MUSCLE STIMULATOR devices must not be used in the area of:

  • Heart
  • Eyes
  • Genitals
  • Pregnant uterus
  • Open wounds
  • Implants

CAVEATS

  • Use the device only for purposes stated in the Manual
  • After use, unplug the device from power supply grid
  • During cleaning, unplug the device from power supply grid
  • Do not place the device on metal surfaces and electrical appliances
  • Do not let the device come in contact with water and other liquids
  • Do not let the device unattended during operation
  • Do not let the device unattended in the vicinity of children
  • Do not use the device if any of the parts are damaged
  • Do not store the device in direct sunlight, high temperature, or in damp areas
  • Do not modify or change device components without authorisation
MAINTENANCE INSTRUCTIONS
  • Clean the device only with dry cloth, without use of cleaning agents
  • After each use, swipe the electrodes with cloth

TECHNICAL SPECIFICATIONS

HX-K7

HX-K7p

HX-K9

HX-K11

Power supply

220 V, 50-60 Hz

220 V, 50-60 Hz

220 V, 50-60 Hz

220 V, 50-60 Hz

Power consumption

< 10 W

< 10 W

< 10 W

< 10 W

Signal frequency

10-150 Hz

10-150 Hz

10-150 Hz

10-150 Hz

Intensity adjustment

Yes

Yes

Yes

Yes

Contraction adjustment

Yes

Yes

Yes

Yes

Relaxation adjustment

Yes

Yes

Yes

Yes

LED indication of activity

Yes

Yes

Yes

Yes

Timer

Yes

Yes

Yes

Fail-safe

Number of electrodes

24

24

16

8

Programmed modes

No

5

No

No

Dimensions (cm)

45 x 45 x 20

45 x 45 x 20

45 x 45 x 20

20 x 20 x 10

Weight of kit (kg)

3

3

2

1

USER’S MANUAL

  • Frequency : Depth of penetration of an electrical signal is reversely proportional to their frequency. Electrical signals of lower frequency have a deeper penetration, and vice-versa.
  • Contraction : Time of muscle contraction is directly proportional to contraction. Lower value of contraction results in shorter time of contraction of muscles, and vice-versa
  • Relaxation : represents the so-called muscle rest time and is set individually
  • Intensity : adjusted by preference/choice
  • The recommended time between stimulations is 24 hours
  • The total number of simulations depends on indication, usually around 10
  • Recommendation is for a therapy in combination with ultrasonic waves
  • Important note: In an event of lapse of stimulation, set the channel intensity to minimum value (far-left position), and check the electrodes (fasten them with the belt) and cables (their contact with the electrode).

CONTROL STICKER

The bottom of the device is affixed with a HAROX TECHNOLOGIES, INC. control sticker with a serial number, as it is shown in figure 5.

Fig. 5 : Control HAROX sticker

 

Ovaj proizvod je uvršten u naš katalog dana 13. Jul. 2007..
Komentari
Korpa više o ...
0 proizvoda
Povoljni uslovi plaćanja više o ...
  • ODLOŽENO PLAĆANJE
  • 3-6 mesečnih rata
  • BEZ KAMATE
  • Mesečna rata 1.000 din
Obaveštenja više o ...
ObavestiObavesti me o promenama na HAROX elektro misicni stimulator HX-K11
Posalji proizvod prijatelju
 

Copyright Internacionalni Anti-Stres Centar (IASC) 2005.   Sva prava zadrzana
telefoni: +381 11 78-38-111 & + 381 65 39-73-798